To correctly replace the UV lamp, please follow the instructions below:

1. Switch off the device and remove the power plug from the power socket:

2. Remove the 4 screws at the top side as shown:

3. Lift off the top cover:

4. Remove the 2 screws at the left and right side of the UV bulb as shown:

5. Take out the bulb compartment and turn it around. Now remove the 2 screws as shown:

6. Now take off the 2 covers at the sides of the UV bulb:

7. Turn the UV bulb clockwise until you hear a CLICK:

8. You can now take out the UV bulb by lifting it:

9. Place the new bulb in the reversed way as you removed the old one:

10. Turn the bulb counter clockwise until you hear a CLICK:

11. Place back the covers over the sides of the UV bulb:

12. Fix the covers by attaching the screws from the bottom side as shown:

13. Fix the bulb compartment inside the top cover by attaching the 2 screws as shown:

14. Place back the top cover:

15. Fix the top cover by attaching the 4 screws from the top side:

Now your device is ready for use!